Here in this guide, we will help you to flash the magisk to root Teclast M20 4G. Read our step by step guide properly!

Who doesn’t want to get the most of his Android device..?! Getting the superuser access through the root and to be able to control various aspects like clock, access to cache etc. are few of the various possibilities that we can explore. When we mention root access, this means we need to perform a certain modification that will root our phone and we will have access to the root directory of our device. In this post, we will show you how to root Teclast M20 4G.

We will use the Magisk by patching the stock boot image and flash that to your boot partition. All you need to do is download the patched image file from Magisk Manager and flash it.

You need to have an unlocked bootloader on your phone before you can root Teclast M20 4G. We have detailed the method on that below.

Mostly uninitiated people compare rooting with hacking which is not correct. The purpose in both contexts is quite different. Hacking is more like breaking into someone’s else system illegally, whereas rooting is mostly done by the owner of an Android device to gain superuser advantages of the device.

Steps To Root Teclast M20 4G Using Magisk

First of all, we need to unlock the device bootloader on Teclast M20 4G. Then you can continue with the next steps. After this, we need to download and flash the patched ramdisk file which we mentioned above.

Remember,

  • After Rooting, it may void the warranty of your phone.
  • Rooting will block the OTA updates

Before moving on to the flashing steps, you need to follow a few,

Download Patched Boot and Original Boot Image

For all required files: Check 4PDA website [Translate]

If you are using any new version of ROM, then you can just download the factory image and then create the boot patched image via Magisk. Here is this guideline on how to Create Patched Stock Boot Image using Magisk.

Pre-Requisites

  • Make sure to have enough battery charge on your phone to avoid interruption during the patch installation.
  • Before performing any modification take backup of your device data.
  • This image file is strictly for Teclast M20 4G only. Do not use it on any other OnePlus or other Android devices.
  • You need a PC or laptop to upgrade your device or root your device
  • You need to Download Latest SP Flash Tool
  • VCOM driver: Download VCOM Driver and install on your computer (still compatible with MT67xx phones)
  • Install Latest Driver: Install the Latest Teclast USB Drivers. [For All Android USB Drivers]

Disclaimer: We are at GetDroidTips will not be responsible for any bricking/damage to your phone while/after installing this ROM.

How To Install the Patched Boot Image on Teclast M20 4G

Assuming that you have used our above instruction and unlocked the bootloader, we will continue on flashing the patched boot image.

  • First, let’s begin by downloading the Teclast M20 4G Stock Firmware.
  • Download the SP flash tool and other important drivers. [Make sure to install all required drivers]
  • Download the Stock firmware and unzip it.
  • Make sure to move the patched boot image to the stock firmware folder and replace it with the original boot image.
  • Now open the SP Flash tool folder and look for the flashtool.exe and open that
  • Once SP Flash tool loads, you will see the screen with a mobile device picture, Now Tap on the menu download (See the screenshot below)
  • Tap on the Scatter-loading menu and load the Scatter file which is inside the stock firmware folder
  • Once you see the screen below, remove ALL the checkboxes from the images, leaving only a tick on the boot
  • Click the Download button
  • Now to start the Flashing process, You should Remove your battery (Only if battery removable) Insert again, Hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  • Once the phone connects, Flashing will begin, Wait for a few minutes until you see a green button like this
  • When the phone got booted download magisk manager here and install it.
  • Make sure you checked “Preserve force encryption” and “preserve AVB 2.0/dm-verity”.
  • Click on Install and select Direct Install (Recommended)
  • Wait till it’s installed and ask you to reboot your device, reboot it.

So, that’s it. Now that you have rooted your Teclast M20 4G, you can try this out. If you have any queries regarding this, do let us know.