Here in this guide, we will help you to flash the magisk to root Tecno Spark Youth. Read our step-by-step guide properly!

Who doesn’t want to get the most of his Android device..?! Getting the superuser access through the root and being able to control various aspects like a clock, access to the cache, etc., are a few of the various possibilities that we can explore. When we mention root access, this means we need to perform a certain modification that will root our phone, and we will have access to the root directory of our device. In this post, we will show you how to root Tecno Spark Youth.

We will use the Magisk by patching the stock boot image and flash that to your boot partition. All you need to do is download the patched image file from Magisk Manager and flash it.

Mostly uninitiated people compare rooting with hacking which is not correct. The purpose in both contexts is quite different. Hacking is more like breaking into someone’s else system illegally, whereas the owner of an Android device mostly does rooting to gain superuser advantages of the device.

Steps To Root Tecno Spark Youth Using Magisk

Remember,

  • After Rooting, it may void the warranty of your phone.
  • Rooting will block the OTA updates.

Before moving on to the flashing steps, you need to follow a few,

Pre-Requisites

  • Make sure to have enough battery charge on your phone to avoid interruption during the patch installation.
  • Before performing any modification, take a backup of your device data.
  • This image file is strictly for Tecno Spark Youth only. Do not use it on any other OnePlus or Android devices.
  • You need a PC/Laptop with a micro USB cable to connect.
  • Make sure that you download all the required files on your PC/Laptop

Required Downloads:

  • Download ADB and Fastboot files. (Windows/MAC)
  • Download and Install Tecno USB Drivers.
  • Download Other Drivers: Mediatek VCOM Drivers or MTK USB Drivers
  • Download Latest Tecno Spark Youth Stock ROM
  • Download And Install SP Flash tool on your PC

1. How to Extract and Patch Boot.image using Magisk?

  • First of all, download and extract the ROM to your PC.
  • Attach your device via USB cable and copy only the boot.img file from the extracted folder to your device storage
  • Launch Magisk Manager. When a popup appears asking to install Magisk, select INSTALL and choose install again.
  • Tap on “Patch Boot Image File.”
  • Navigate to internal storage and select your phone’s boot image that you transferred earlier.
  • Wait for a couple of seconds. Magisk will start patching the boot image.
  • Once the boot image has been patched, copy the “patched_boot.img” from the internal storage and replace it in the same extracted ROM folder on your PC.

Now you can follow the second step to flash the patched boot image file.

Disclaimer: We are at GetDroidTips will not be responsible for any bricking/damage to your phone while/after installing this ROM.

2. How To Install the Patched Boot Image on Tecno Spark Youth

First method

Follow the given link to install Patched Boot Image on Tecno Spark Youth:

Second method

  • We assume that you have already downloaded the ADB & Fastboot tool from the link given above.
  • Now, extract the ADB fastboot tool, then move the patched boot image to the same folder.
  • Hold the Shift key and right-click on the mouse to open the command window/PowerShell.
  • Next, enter the following command:
  • Flash the “patched_boot.img” to install Magisk and root your Android device:
  • fastboot flash boot patched_boot.img
  • For devices with an A/B partition system, use the following commands:
  • fastboot flash boot_a patched_boot.img
  • fastboot flash boot_b patched_boot.img
  • Please replace [patched_boot.img] with the name of the boot image file you downloaded, followed by the .img extension.
  • The flashing process will begin. Once done, run.
  • fastboot reboot

How to Verify if your phone has a systemless root?

  • Download and install the Magisk Manager app APK, and launch it.
  • To verify that you have a systemless root, check the top of the screen and if you see all options with Green Tick, which means you have successfully rooted and bypassed SafetyNet.

So, that’s it. Now that you have rooted your Tecno Spark Youth. If you have any queries regarding this, do let us know.

  • Flash the “patched_boot.img” to install Magisk and root your Android device:
  • fastboot flash boot patched_boot.img
  • For devices with an A/B partition system, use the following commands:
  • fastboot flash boot_a patched_boot.img
  • fastboot flash boot_b patched_boot.img
  • Please replace [patched_boot.img] with the name of the boot image file you downloaded, followed by the .img extension.

fastboot flash boot patched_boot.img

fastboot flash boot_a patched_boot.img

fastboot flash boot_b patched_boot.img

Please replace [patched_boot.img] with the name of the boot image file you downloaded, followed by the .img extension.

fastboot reboot

  • ByPass FRP on Tecno Spark Youth KA6 | Reset Using CM2, Miracle or UMT Tool
  • How to Install Stock ROM on Tecno Spark Youth KA6 [Firmware Flash File]
  • Tecno Spark Youth KA6 DA File | Download MTK Secure Boot Auth File